Shimano SH-RC810 Standard Road Bike Shoes
$2,280.00
Color Options
WhiteSize Options
S-PHYRE-derived race performance, built around the foot shape most riders have. The Shimano SH-RC810 Standard is a carbon-soled road cycling shoe with a stiffness index 11 sole, dual BOA® Li2 dials and the new SHIMANO DYNALAST 2.0 Standard last, combining efficient power transfer with long-ride comfort.
Shimano SH-RC810 Standard at a glance
- What it is: a performance road shoe from Shimano’s RC8 line, one tier below the flagship S-PHYRE RC910
- Fit: SHIMANO DYNALAST 2.0 Standard — a roomier forefoot and less toe spring than Shimano’s previous Standard last
- Sole: hollow-channel carbon midsole, official Shimano stiffness index 11
- Closure: two low-profile BOA® Li2 dials
- Cleats: compatible with SPD-SLR and SPD-SL cleats; lowest stack height with SPD-SLR pedals
- Best-match pedal: Shimano Ultegra PD-R8200 (SPD-SLR)
- Best for: road riders with average-width feet moving up to a carbon sole for racing, group rides and long training days
Standard, Wide or Narrow? Shimano explains
Video: “SHIMANO DYNALAST 2.0 Fit Systems Explained” from Shimano’s official YouTube channel.
Why upgrade from entry-level road shoes?
Most entry-level road shoes use nylon or fibreglass soles. Under hard efforts they flex slightly, so some of your power never reaches the pedal, and over a long ride the pressure concentrates around the cleat, causing hot spots under the ball of the foot. On Hong Kong’s constant ups and downs — Tai Mo Shan, Fei Ngo Shan or the rolling roads of Sai Kung — those small losses keep adding up.
The SH-RC810 uses a rigid carbon midsole to deliver your effort straight to the pedal while spreading pressure across the whole sole. The new DYNALAST 2.0 last adds forefoot room so your toes can splay naturally, reducing fatigue late in the ride.
Who is the SH-RC810 Standard for?
- Riders with average-width feet who are comfortable in typical road shoes
- Riders upgrading from a nylon or fibreglass sole to carbon
- Racers, group riders and long-distance riders who want stiffness and comfort in one shoe
- Riders planning to move to Shimano’s new SPD-SLR pedal system
If your forefoot often feels squeezed, choose the SH-RC810 Wide. If standard shoes feel loose even when fully tightened, consider the SH-RC810 Narrow.
SH-RC810 Standard vs Wide vs Narrow
The three SH-RC810 versions differ only in the last, so the right one depends on your foot shape:
| SH-RC810 Standard (this page) | SH-RC810 Wide | SH-RC810 Narrow | |
|---|---|---|---|
| Last | DYNALAST 2.0 Standard | DYNALAST 2.0 Wide | DYNALAST 2.0 Narrow |
| Forefoot and toe room | Roomier than the previous Standard last | Roomiest of the three, wider than the previous Wide and Standard lasts | Snuggest wrap of the three |
| Best for | Most riders with average-width feet | Wider feet, or riders whose forefoot gets squeezed or toes go numb | Narrower feet or heels that lift; many women riders find it fits best |
| Sizing tip | Sized up for room before? Try half a size smaller | Sized up for width before? Try half a size smaller | Choose your usual size by foot length |
| Sole | Carbon, stiffness index 11 | Carbon, stiffness index 11 | Carbon, stiffness index 11 |
| Closure | Dual BOA® Li2 dials | Dual BOA® Li2 dials | Dual BOA® Li2 dials |
| Cleats | SPD-SLR, SPD-SL | SPD-SLR, SPD-SL | SPD-SLR, SPD-SL |
Comparison source: Shimano official product information.
What makes the SH-RC810 Standard worth it
DYNALAST 2.0 Standard: a more natural forefoot
SHIMANO DYNALAST 2.0 gives a wider forefoot, a more generous toe box and reduced toe spring, letting your toes splay naturally under load and reducing carbon-sole fatigue over long, intense rides. Shimano notes that riders used to its Standard fit will find the new toe box roomier, and riders who previously sized up for extra room may prefer half a size smaller for a more precise fit.
Stiff carbon sole with an extra-wide cleat adjustment range
A rigid, hollow-channel carbon midsole (stiffness index 11) turns effort into speed, while the hollow channels vent air and drain water — useful in Hong Kong’s humid summers and sudden downpours. A seamless midsole structure lowers the stack height: paired with SPD-SLR pedals and cleats, your foot sits closer to the pedal axle for a more direct, stable connection. The extra-wide cleat adjustment range and clear alignment markings make setting up your cleats easier.
Dual BOA® Li2 dials for an even wrap from toe to instep
Two low-profile BOA® Li2 dials let you fine-tune tension over the forefoot and instep separately, in small clicks, even while riding. The updated surround-wrapping upper spreads that tension evenly from toe to instep, reducing pressure points.
A heel that stays put, and pads you can replace
An external heel stabiliser and extended midsole keep your foot in position during sprints and steep climbs. When the heel pads wear down from walking to the café, they can be replaced — extending the life of the shoe.
How to choose your size
- Measure your foot length in centimetres, following the steps on the chart.
- Match it to your EU size on the conversion chart. Shimano notes that cycling shoes should be snug — if you fall between sizes, go up.
- If you have previously sized up in Shimano shoes just for more room, try half a size smaller in the new DYNALAST 2.0 Standard fit.
Jollymap tip: Foot length is only half the story — width, arch and how your foot sits on the pedal all matter. Our Jollymap Bike Fit service measures your foot length and width, recommends the right size and last, and can set up your cleats at the same time. Already have your shoes? Book our Shoe Cleats Setup service: we set the position and angle of your cleats from your foot length, width and metatarsal position in about 20–30 minutes (bring your own shoes and cleats). The service covers Shimano SPD-SL cleats; if you use SPD-SLR cleats, please check with us first.
Pedal and cleat compatibility
The SH-RC810 sole accepts both SPD-SLR and SPD-SL cleats, so the right choice depends on your pedals:
- On SPD-SLR pedals (such as Ultegra PD-R8200): fit SPD-SLR cleats for the lowest stack height. Engagement drops from 15.5° to 10.5° for easier clip-in, and SPD-SLR cleats need no spacers, making them up to 22% lighter.
- Keeping your SPD-SL pedals (such as the Ultegra PD-R8000 or 105 PD-R7000): simply fit SPD-SL cleats — no need to change pedals. SPD-SL cleats in our shop: SM-SH10 (red, fixed), SM-SH12 (blue, 2° float) and SM-SH11 (yellow, 6° float).
The key rule: SPD-SLR pedals only work with SPD-SLR cleats, and SPD-SL pedals only work with SPD-SL cleats. Cleats are not included with the SH-RC810 and are sold separately.
| SPD-SLR cleat | Float | Best for |
|---|---|---|
| CL-SL100 (red) | Fixed, 0° | Maximum power transfer, sprinters |
| CL-SL120 (blue) | Narrow float | Riders who want a little movement with a precise feel |
| CL-SL110 (yellow) | Moderate float | Most riders; kinder on the knees |
| CL-SL130 (grey) | — | Non-Shimano 3-hole shoes on SPD-SLR pedals |
Specifications
| Brand | Shimano (Japan) |
|---|---|
| Model | SH-RC810, 2027 model year |
| Fit | SHIMANO DYNALAST 2.0 Standard |
| Use | Road |
| Gender | Unisex |
| Upper | Lightweight synthetic leather, surround-wrapping design |
| Closure | Dual BOA® Li2 dials |
| Sole | Rigid hollow-channel carbon midsole, seamless midsole structure |
| Stiffness index | 11 |
| Cleat type | SPD-SLR, SPD-SL |
| Best-match pedal | Shimano Ultegra PD-R8200 |
| Heel | External heel stabiliser, replaceable heel pads |
| Colours | White, Black, Peach (see the options above for colours currently sold online) |
Specifications from Shimano’s official product data.
FAQ
What is the difference between the Standard, Wide and Narrow SH-RC810?
Only the last differs — the sole, closure and materials are identical. The Standard last suits most feet; the Wide last has a broader forefoot and larger toe box for wider feet; the Narrow last gives a snugger wrap for narrower feet or riders who prefer a close, race-oriented fit, and Shimano notes that many women riders find the Narrow the best fit.
Should I choose Standard or Wide?
Choose Wide if your forefoot often feels squeezed, your toes go numb, or you have always sized up to get enough width. Otherwise, the Standard fit gives plenty of room. If you are unsure, a Jollymap Bike Fit measures both length and width.
Can I use my current Shimano SPD-SL pedals with the SH-RC810?
Yes. Shimano lists the SH-RC810 as compatible with SPD-SL cleats, so you can fit SPD-SL cleats and keep your current pedals; most riders get on well with the SM-SH11 yellow 6° float cleats. For the lowest stack height, switch to SPD-SLR pedals and cleats.
Are cleats included?
No. The SH-RC810 is sold without cleats, so please add SPD-SLR or SPD-SL cleats to match your pedals.
Which SPD-SLR cleat should I choose?
Most riders are best served by the yellow CL-SL110 with moderate float, which lets the knees move naturally. Choose the blue CL-SL120 for a more precise feel, or the red CL-SL100 for zero float.
Is a stiffness index of 11 too stiff for everyday riders?
No. Stiffness index 11 is race-level, but the DYNALAST 2.0 last spreads pressure across the whole foot — Shimano designed it specifically to reduce carbon-sole fatigue on long rides — so the SH-RC810 works well for long training and group rides too.
Will the SH-RC810 cope with Hong Kong’s heat and rain?
Yes. The hollow-channel carbon midsole vents air and drains water, and the synthetic upper is breathable. After wet rides, remove the insoles and let the shoes dry naturally, away from direct heat.
How does the SH-RC810 compare with the S-PHYRE RC910?
The SH-RC810 borrows key technology from Shimano’s flagship S-PHYRE RC910 — DYNALAST 2.0, dual BOA® dials and a low-stack carbon sole — at a lower price point. The RC910 adds a carbon heel cup and Shimano’s Carbon Hollow Core midsole for riders chasing every last gram.
Last updated: September 2026
